Cleaning a Touch Screen Monitor

Below are the approved disinfectants for use on Medical Grade Dual 4K/2K UHD Medical Monitors & Industrial Grade Full HD Touch Screen Monitors. The disinfectants have been validated on both housing and the touch glass. To prevent potential damage to the computers, please use the disinfectants listed below.

Should you have any questions, please reach out to your Touch Screen Guru for additional information.

Touch Screen Cleaning

For cleaning best practices, please use a pre-moistened wipe with the disinfectant already applied, or spray the disinfectant on to a cleaning cloth and clean the unit. Spraying the disinfectant directly on to the unit may cause a drip hazard where the disinfectant will drip on to the floor if too much disinfectant is sprayed on to the unit.

NEVER use abrasive cloths. They will scratch the touch screen.

Step 1

Unplug the touch screen USB

Step 2

Use a pre-moistened wipe with disinfectant already applied, or spray the disinfectant on to a non-abrasive cleaning cloth

Step 3

Wipe the touch screen clean

Step 4

Plug the touch screen USB in

Approved Cleaning Chemicals

  • Sani-Cloth
  • 70% Isopropyl Alcohol

  • ViraguardĀ®

  • CaviWipes (or similar)
  • Windex (or similar)
  • Clorox Disinfecting Wipes
  • Ammonium Chloride 10%

  • Healthcare Hydrogen Peroxide Wipes

  • Alcohol Prep Pads

  • Super HDQL 10

  • Sodium Hypochlorite 6%

Chemicals that will cause damage

  • Ammonia
  • Nitric Acid
  • Turpentine
  • Toluene
  • Hydrogen peroxide
  • Bleach (Sodium Hypochlorite, NaOCI)